BETTAR / BADU Top

Bettar / BADU Top pumps essentially constitute an extension of the performance range of the BADU Magic pumps - for medium-sized filter units up to 14 m³/h.

Field of application

Swimming pool water circulation through a filter system. The pump can be installed max. 3 m above or below water level.

Design

Monoblock-type pump with integrated strainer tank. The bellows-type mechanical seal is mounted on a plastic shaft protector sleeve. Motor/pump shaft has no contact with the pool water! Total electrical separation.

Technical data

flow rate Q

BETTAR 8: 8 m³/h
BADU Top 8: 8 m³/h
BETTAR 12: 12 m³/h
BADU Top 12: 12 m³/h
BETTAR 14: 14 m³/h
BADU Top 14: 14 m³/h

Motor performance

BETTAR 8: 0.30 kW
BADU Top 8: 0.30 kW
BETTAR 12: 0.45 kW
BADU Top 12: 0.45 kW BETTAR 14: 0.65 kW
BADU Top 14: 0.65 kW

Strainer capacity

approx. 3 l

Strainer basket mesh size

approx. 3,2 x 2,6 mm

Materials used

Pump casing

PP TV 20

Gland housing

PP TV 40

Impeller

PA 66 GF 30 / PC

Strainer basket

Mechanical seal

carbon / ceramic / NBR

Bolts

steel, galvanized

Motors

Special motors on request. The pumps, as described, can be used for pool water with a salt concentration of up to 0.5%, i. e. 5 g/l. In case of a higher salt concentration please contact us.

Also available in AK-Version

Downloads

Dimensional Drawing

Characteristics

BETTAR / BADU Top Circulation pump, self-priming

BETTAR / BADU Top

BETTAR / BADU Top
Circulation pump, self-priming